Bifinett Scale KH 1155 User Manual

Bifinett KH 1155_UK.qxd 11.12.2003 14:17 Uhr Seite 1  
7
in.10g/  
KG/LB  
Z/I  
6
5
in.1kg7  
A
5
4
3
2
1
KG/LB  
Z/I  
B
 
Bifinett KH 1155_UK.qxd 11.12.2003 14:17 Uhr Seite 3  
Weighing  
Cleaning  
i
If you switch on the scale then place the bowl  
on the  
weighing plate, the weight of the bowl is displayed.  
If you place the bowl on the scale then switch on the scale, the  
weight of the bowl is not displayed.  
!
Important!  
Make certain that no liquids enter into the  
scale. Penetrating liquids can damage the  
scale.  
If the display  
does not automatically show "0", press the Z/T  
button ባ  
once.  
Place the bowl on the weighing plate.  
Press the on/off button to turn on the scale.  
Wash the scale with a light cloth moistened with mild soap suds.  
Never use abrasive agents or solvents.  
Set the desired unit (grams/ounces). To do this, press the  
KG/LB button  
.
The configured unit appears beneath the wieght value in the dis-  
play.  
Operation  
The scale shows the weight "0" and ZERO appears in the display.  
Add the material to be weighed to the bowl.  
The weight is shown on the display.  
Inserting the Battery  
Open the battery compartment cover on the underside of the  
scale.  
i
If you would like to switch the display between grams and  
ounces, press the KG/LB button.  
!
Poison hazard!  
Batteries can be swallowed by children and endanger their  
health. Keep batteries out of the reach of children.  
Connect a 9 V battery.  
Close the battery compartment cover until it snaps into place.  
 
Bifinett KH 1155_UK.qxd 11.12.2003 14:17 Uhr Seite 4  
Adding & Weighing (Tare Function)  
Setting the Timer  
You can set the scale to 0 in order to weigh additional partial  
quantities.  
Press the clock button  
once.  
The bell symbol appears in the display  
next to the clock.  
To do this, press the Z/T button  
once.  
Set the desired time with the Z/T  
and KG/LB  
buttons.  
The scale once again shows 0 grams and TARE appears in the  
display  
You can set the time in 10 second steps.  
.
Press the clock button  
You can stop the timer.  
Press the clock button  
You can reset the timer.  
Press the clock button  
to start the timer.  
Add the material to be weighed to the bowl.  
The weight of the added material is shown in the display.  
once.  
i
You can repeat this step multiple times.  
However, never place more than 5 kg on the scale.  
twice.  
When the configured time has elapsed, a signal tone sounds for  
60 seconds. This tone can be shut off by pressing the on/off  
Removing Materials  
Press the Z/T button  
once.  
button  
.
The scale once again shows 0 grams and TARE appears in the  
display  
Temperature Display  
.
When the scale is switched on, the display  
perature in °C in the upper right.  
shows the tem-  
Remove the desired quantity of material.  
The weight value of the removed material appears in the display  
as a negative value.  
Switching Off the Scale  
If you do not weigh anything for 90 seconds, the automatic cut-  
out switches off the scale.  
i
You can repeat this step multiple times.  
To switch it off manually, press the on/off button  
.
4
 
Bifinett KH 1155_UK.qxd 11.12.2003 14:17 Uhr Seite 5  
Troubleshooting  
Technical Data  
When the display shows "Err", the device is overloaded.  
Remove the material from the scale. Never place more than 5  
kg on the scale.  
Weighing range  
Temperature display  
Power supply  
10 g-5000 g, in 1 gram steps  
0 °C-40 °C, in 0.5 °C steps; with 2 °C tolerance  
If the display briefly shows "OL" and the scale cannot be swit-  
ched on, the scale is overloaded. Remove the material from  
the scale and switch the scale on again. Place less than 5 kg  
on the scale.  
9 V battery  
Warranty and Service  
The warranty conditions and the service address can be found on  
the warranty slip.  
If your scale does not function as expected, replace the bat-  
tery. Should this not correct the faulty functioning, please con-  
tact the manufacturer.  
When the display shows "LO", the battery is low. Replace the  
battery.  
Conformity Declaration and Manufacturer  
Kompernaß Handelsgesellschaft mbH,  
Disposal  
Burgstraße 21, D-44867 Bochum, Germany,  
hereby declares this product to be in accordance with the  
following standards and directives:  
Dispose of used batteries or the Bifinett KH 1155 kitchen scale  
through a certified disposal company or your community disposal  
company. Never put used batteries or the kitchen scale into  
normal household waste.  
Low Voltage Directive 73/23/EEC  
EN 60,335-1  
Electromagnetic Compatibility (EMC) Directive 89/336/EEC  
EN 55 014-1  
EN 55 014-2  
EN 61 000-3-2  
EN 61 000-3-3  
Obey the currently applicable regulations. In case of doubt,  
contact your disposal company.  
Type of Appliance/Type: KH 1155  
Bochum, 17 October 2003,  
Hans Kompernaß,  
Managing Director  
3
 
Bifinett KH 1155_UK.qxd 11.12.2003 14:17 Uhr Seite 6  
IDNr.: KH1155-11/03-V3  
 
Bifinett KH 1155_UK.qxd 11.12.2003 14:17 Uhr Seite 7  
KH 1155  
Operating Instructions  
UK  
 

Bissell Pet Care Product 33N7 User Manual
Black Box Network Hardware avx dvi tp 100m User Manual
Black Box TV Converter Box AC095A User Manual
Bodum Espresso Maker 3020 USA User Manual
Braun Outdoor Ceiling Fan 33657 User Manual
Casablanca Fan Company Outdoor Ceiling Fan 84GxxD User Manual
Casio Digital Camera QV R41 User Manual
Cecilware Cooktop IWC 25A User Manual
Cerwin Vega Car Amplifier CV 5000 User Manual
Chicago Electric Power Roller Model 97641 User Manual